Wood Talk | Woodworking

It’s show #604 - On today’s show, we’re talking about epoxy as a filler, Carter bandsaw guides, and pegged moretise & tenons. Sponsored by : Use code WT2026 for 10% off - Exclusions apply. What's On the BenchMarc only sells merch now, no more content so get your preppin' weapons and glue rollers at TWWStore.comMatt finished the breakfast table and has moved on to the bench seat.Shannon is struggling with the accuracy OCD that comes with industrial machines.Kickback and StuffLaura is heading up an exhibition of local woodworker's projects at the San Carlos, CA Woodcraft store. For details check out the Bay Area Woodworkers.Darren has had success bleaching turnings and wonders if this would be an option for keeping the natural white oak tone we talked about recently.Harold proposed and she said yes! While sitting in cool rocking chairs. Listener QuestionsDoug has questions about using epoxy to fill voids in Cherry for a table top.Bryan pegged some tenons with toothpicks and those picks have backed out 3/16".Bryan took the Alex Snodgrass class and asks for an unsponsored review on Carter bandsaw guides.Selected Woodcraft EventsStore Specific Events: Tool Swap – Sunday April 26th 8am to 1pm – Sacramento, CAFind great deals on lumber, used tools, and other woodworking items. Orbring yours to swap!Classes Columbus, OHBuild a concert Ukulele – April 25th & 26th 3pm - 9pmAlex Snodgrass Tour Stops in April https://www.woodcraft.com/pages/alex-snodgrass-the-next-cut-tour • Grand Rapids, MI • Sterling Heights, MI • Columbus, OH • Cincinnati, OH Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #603 - On today’s show, we’re talking about our thoughts on avoiding sharpening, pole lathes, and what to do when you have too much footage (aka, a Matt problem) Sponsored by : Use code WT2026 for 10% off - Exclusions apply. What's On the BenchMarc finished the book press.Matt is applying finish to the breakfast table.Shannon taught a bunch of 7th graders how to build stuff.Kickback and StuffAndy responds to our "what is the legends had modern tools and YouTube" by saying that it might get ugly considering Jame Krenov was known to have called Sam Maloof a "router jockey".John asks if any of us compete on our bikes or just ride for fun and leisure.Listener QuestionsTech Support asks if any of us avoid sharpening certain tools.Matt asks how we manage extra footage when filming in order to get through loads of clips more efficiently.Andy wants to make a pole lathe due to his limited space and asks Shannon what he would recommend or do differently from his own lathe builds.Selected Woodcraft EventsApril 10th - 13th Spring Shavings Sale (15% off STOREWIDE)Store Specific Events: Tool Sale – Saturday April 4th 9am to 3pm – Richmond, VARichmond Antique Tool Society will have a great selection of antique andvintage tools for sale. Also, demonstrations and assistance on repairing and sharpening so bring your old hand planes and chisels!▪ https://www.richmondantiquetools.com/Classes Rockville, MDKids Workshop – Candy Dispenser – April 18th 2pm-4pmTeens Workshop - Outdoor Planter - April 19th 10am - 5 pmBoise, IDTusk Tenon Wall Shelf – April 9th 4:30pm - 9pmKansas City, KSSquare Edge Bowl – April 12th 12pm-4pmAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #602 - On today’s show, we’re talking about what would happen if woodworking legends had access to today’s technology, a quick drying wood finish, anti-fatigue mats for the shop, and chisel types and you. Sponsored by : Use code WT2025 for 10% off - Exclusions apply. What's On the BenchMarc made some fancy Walnut garage steps.Matt is working on the breakfast table.Shannon is prepping parts for a middle school class project on Bluebird boxes.We Did PodcastsAll 3 of us cheated on WoodTalk and appeared on another podcast. Well Shannon didn't, he just hosts another one is a constant dirty cheater Matt was on the Woodturners JourneyMarc was on the Modern Woodworkers PodcastShannon hosts The Lumber Update Podcast always...the cheaterKickback and StuffGreg asks If Maloof, Nakashima, Krenov, Frid, and Carpenter had access to modern tools, like CAD, the Festool Domino, and digital conveniences, do you think their work would have been even better, or just different? And in this digital era, would they be revered legends still, or just another set of woodworkers on YouTube? Listener QuestionsYukiki is leading a class on picture frames and asks about a fast drying finish that will allow her students to complete finishing by the end of the class.Tony's feet hurt and he asks what we put on the floor of our shops in the way of mats.David bought some bench chisels at Woodcraft and asks about the other types of chisels and why he would want and use them.Selected Woodcraft EventsStore Specific Events: March Mania – March 14 & 15 – Parkersburg, WV, Cincinnati, OH, Roanoke, VA: 15% Off Almost Everything and Demos all dayDemos Table Saw Tune-Up - Saturday, March 14th, 1pmKeeping your table saw in top working order makes your project easier and safer. Stop in as we show you how!Joinery Jigs - Saturday, March 21st, 1pmA couple of boards and some nails might work, but they may not be the best solution to keeping your project in one piece. Join us as we review different types of joinery jigs to help you build a strong finished piece.Classes Rockville, MD: Teens Workshop – Bandsaw Box - Sunday, March 15, 10 AM - 5 PMRichmond, VA: Marquetry: Cutting, Assembly, And Veneer Fundamentals - Saturday, March 7, 9 AM - 3:30 PMChattanoga, TN: A variety of Jess Crow Resin classes from March 6th through March 10thAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #601 - On today’s show, we’re talking about sharpening hand saws, making a bowl without a lathe, and woodworking design resources Sponsored by : Use code WT2025 for 10% off - Exclusions apply. What's On the BenchMarc is cutting really big tenons.Matt is wrapping up his breakfast bench build for the Guild.Shannon wants to buy a pneumatic elevator and bought caning supplies.Kickback and StuffLee from Regal Street Woodworks writes in to explain his end grain jointing process.David shares a tale of changed shorts when jointing end grain turned a cookie into a frisbee.Luke built a weekend project using "wisdom" from all 3 of us...but mostly his newly honed sharpening skills gained from a class at his local Woodcraft store.Listener QuestionsNate asks us to list some design resources after our discussion about how design isn't covered much in woodworking.Dave is trying to make a bowl without a lathe using a hole saw and asks for advice to keep his bowl from flying across the shop.Tyler is tempted by used hand saws and asks whether to sharpen himself or send off to an expert.Selected Woodcraft EventsStore Specific Events: March Mania – March 14 & 15 – Parkersburg, WV, Cincinnati, OH, Roanoke, VA,15% Off Almost Everything and Demos all dayLocal Store Anniversary Celebration – March 7th – Rochester, NYDemos, Food, Giveaways, Special SalesDemos Table Saw Tune-Up - Saturday, March 14th, 1pmKeeping your table saw in top working order makes your project easier and safer. Stop in as we show you how!Joinery Jigs - Saturday, March 21st, 1pmA couple of boards and some nails might work, but they may not be the best solution to keeping your project in one piece. Join us as we review different types of joinery jigs to help you build a strong finished piece.Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #600 - On today’s show, we’re talking about color matching, tigerwood workbench, and wood on a metal lathe. Sponsored by : Use code WT2025 for 10% off - Exclusions apply, valid until Jan 31st 2026 What's This Sh&%t [caption id="attachment_49354" align="alignright" width="239"] Screenshot[/caption] We saw this process shared on Powermatic's IG account and question the safety and missed opportunity to educate as a major power tool manufacturer. We would love to hear from the maker about the process he used and how it is working for him. What's On the BenchMarc is making a book press.Matt is starting on his breakfast bench project.Shannon blew up his other knee while doing a sawing demo. He is OLD!Kickback and StuffPaul recommends FreeCAD as a SketchUp alternative that he finds similar to many of the higher powered solutions on the market.Hamilton gravitated to wax finishes due the safety and health aspects as he found so many other finish products had harmful VOC levels.Dick says, "yep that's actually my name", and "yes, its normal sized"Listener QuestionsBob asks about using color and toning finishes as all his experience lies in clear coat finishes. Greg asks about the differences between metal and wood lathes and what will suit his needs.Amy has a bunch of Tigerwood 1x6 laying around and asks about using it for a workbench.Selected Woodcraft EventsStore Events: Don’t miss Alex Snodgrass’ Next Cut Tour: 2/20-2/21 - Orlando2/22-2/23 - Clearwater2/24-2/25 - Birmingham2/26-2/27 - AtlantaWoodcraft often has local club meetings in their stores too! Virginia Beach, VA: Tidewater Woodworkers Guild Meeting Monday, February 23Dayton, OH: Miami Valley Wood Carvers Carve-in, Tuesday, February 17Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #599 - On today’s show, we’re talking about finding yourself rudderless in woodworking, when to fire a customer, woodworking on an open-sided deck, woodworking topics that have been discussed too much and too little, winter shop strategies, and safety lessons for a maker space Listener QuestionsJohn needs to shift his product base as the market has dried up.Alex has a custom job that is going south and he is trying to figure out whether to bail or continue on.Hamilton is working in a covered porch space but with open sides and asks what he should consider with regard to tool maintenance as well as safeguarding his projects.Tomasso asks what woodworking topic has been talked to death and perhaps which ones haven't been talked about enough.Ed asks about winter strategies in the shop for keeping his tools in working order.William manages a maker space and asks about some safety training protocols.Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #598 - On today’s show, we’re talking about safety lessons for a maker space, strategizing lumber for a workbench, helical heads in benchtop planers, cypress finishing. Sponsored by : Use code WT2025 for 10% off - Exclusions apply, valid until Jan 31st 2026 What's On the BenchMarc is bending and laminating to make the fanciest towel rack, and now has his new True Grip Clamp Pads for sale! Matt is cleaning and sterilizing.Shannon took his architect training course on the road to California and admired trees.Kickback and StuffPaul teaches Fusion 360 at his local Woodcraft and shares what he likes about it over SketchUp.Joel comments on how Europeans make better plywood with a history lesson on wooden fighter planes in WWII.Listener QuestionsJoel wants a planer and wonders if a spiral head is worth it in a benchtop model.Von milled a Red Oak log into boards and is now about to build his workbench but asks if there is any particular grain orientation he should consider for the parts as he builds it.Jim is building Adirondack chairs from Cypress. He wants them to grey naturally and wonders if he should put any finish on them at all.Selected Woodcraft EventsIn-Store Classes are awesome. You should take some! Check your local store to see what they have going on. Here’s just a sampling of what’s going on: Store Events: Supreme Bowl Contests – Woburn, MA; Walpole, MA; Richmond, VA; Norfolk, VA; Portsmouth, NH (Separate contests at each store)Submit your bowl to be voted on in a variety of categories. Voting ends February 8th (submission dates and categories vary somewhat by location)Classes: Kansas City, KS – Learn Resin Casting – Saturday, January 31st, 9 to 4January 30th – DATE NIGHT: WINE & CHEESE, Turn a bottle stopper and cheese planeAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #597 - On today’s show, we’re talking about making thin wood without a bandsaw, fixing sticky drawers, Tormek sharpening machine comparisons, and building a rocking chair. What's On the BenchMarc can't move so he is scratching the itch by rearranging the shop.Matt just keeps turning...homemade 40 foot swing lathe in the future?Shannon broke his band clamp while making picture frames, Marc teases with an out of stock band clampWoodTalk Bike CornerShannon rants about e-bike which are great for commuting and getting people into riding, but kids making fun of kids who have to pedal is outrageous. Plus, get some exercise you lazy kids!! shakes fist Kickback and StuffHans let us know that the black MDF we talked about on a previous show is manufactured under the brand Valchromat and they make a variety of colors.Ryan compliments our restraint during Matt's hollow chisel mortiser experience.Darren shares a bushcraft video where they use wooden holdfasts. Listener QuestionsDianne has some sticky drawers in a chest and asks for advice to address it.Seth is a building a Shaker cabinet that calls for tinner stock and asks whether to plane or resaw the material to thickness.Harold wants to build a rocking chair to accompany his proposal attempt to his girlfriend and asks about where to start with building it.Mark is look at the Tormek for sharpening both shop tools and kitchen knives and wonders about the differences between the models. Marc suggests a specific kitchen knife sharpener which is much easier to use and stays in the kitchen.Selected Woodcraft EventsIn-Store Classes are a great way to make a wonderful holiday gift. Check your local store to see what they have going on. Here’s just a sampling of what’s going on: Store Events: Cabin Fever Event - Jan 24th at Cincinatti, OH; Roanoke, VA; Parkersburg, WVLots of sales. Demos throughout the day. Chance to win prizes.16th Annual Woodworking Expo – January 24th at Phoenix, AZVendor demos, Manufacturer Representatives, storewide power tool specials.Supreme Bowl Contests – Woburn, MA; Walpole, MA; Richmond, VA; Norfolk, VA; Portsmouth, NH (Separate contests at each store) Submit your bowl to be voted on in a variety of categories. Voting ends February 8th (submission dates and categories vary somewhat by location)Classes: January 23rd – DATE NIGHT: PIZZA & BEER; Turn a pizza cutter and bottle openerJanuary 30th – DATE NIGHT: WINE & CHEESE; Turn a bottle stopper and cheese plane.Orlando, FL – Lathe Tool Sharpening Made Easy – Saturday, January 17th, 10 to 3.Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #596 - On today’s show, we’re recapping some of our favorite things of the year and answering your questions. End of Year WrapIts our last show of the year so we spend some time talking about our challenges, new products, and specifically stuff we got from our sponsor, Woodcraft. Kickback and StuffShoutout to Hamilton Ward on his birthday. His wife wrote in and asked us to recognize him.Ryan's comic display worked out great but he asks about when to prefinish and when to skip it.Von likes the bicycle talk, in fact when he listened to our back log he got Peloton bike ads.Listener QuestionsMatt is milling parts for his Guild project tableShannon used a power tool to cut up a live edge slab for an architect.Marc bought a new bike then lots of NYC pizza.Woodcraft Store EventsRockville, MD - 10 Ways to Cut Dovetails with Bob Van Dyke -Saturday, November 29 and November 30, 10 AM - 5 PM Walpole, MA - Volunteers needed Wooden Toy Truck Build for "Toys-for-Tots" Saturday, December 6, 2025, 9:30 AM - 3 PMAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Sponsored by : If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. It’s show #595 - On today’s show, we’re talking about what to do when your workbench sucks, Is wood acclimation BS, and running a lathe backwards. Woodcraft GiveawayCongratulations to Matt Croyle who won the tap room cutting board kit. We also heard from Joe, last months lathe tool giveaway and he does actually have a lathe and has already put his new tools to use. Black Friday SalesWood Whisperer Guild Save 40% with code BlackFriday40BackSide Sandpaper, Wood Whisperer Specials are 20% off!Hand Tool School 50% with code HTS50for15; black friday but 15 yr anniversary.Matt Cremona - Free shipping on Chair Kits and some discount on everything elseWhat's on the BenchMatt is milling parts for his Guild project tableShannon used a power tool to cut up a live edge slab for an architect.Marc bought a new bike then lots of NYC pizza.Kickback   Listener QuestionsVon asks how much wood actually acclimates over the course of a few weeks and if that is a myth.James asks what to do after he built his workbench and then feel inadequate about it after watching hundreds of videos.Joe asks why he would run his lathe backwards because his lathe motor runs both ways.Woodcraft Store EventsNovember 7th and 8th Kreg Demos at every store nationwide.November 8 & 9th- Turn for the Troops events nationwide.Local Store events: too many to list here this time...wow...Goooo Woodcraft! Check your local store for detailsAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Sponsored by : If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. It’s show #594 - On today’s show, we’re talking about finish for a commercial shelf, removable furniture tops and ripply cuts. Woodcraft GiveawayFor November Woodcraft is back with another giveaway. This time they are giving away a Tap Room Cutting Board Kit and you can register to win by filling out the form on our website here. We will draw a winner and announce at the end of November. What's on the BenchMarc finally finished the built-in desk for Nicole.Shannon rants about the quitting perception foisted on him by the market normal.Matt started work on the breakfast tableKickbackTom loves his shaper so much he is teaching a class about it at the Alpine Technical Workshops. If you want to learn more about shapers then this is the place.Von likes Shannon's philosophy on getting things done and it reminds him of the book "Getting Things Done" by David AllenMarc and Matt think how SketchUp handles versioning and authentication is stupid and they complain about it.Listener QuestionsRyan needs a finish suggestion for a comic book shelf he is building for a local store.Dana is building a TV cabinet that is big and heavy and asks about making the top removable yet structural.Rick is sawing Walnut logs with his woodworking guild and they are getting ripply cuts despite changing the blade and doing typical bandsaw triage.Woodcraft Store EventsNovember 7th and 8th Kreg Demos at every store nationwide.November 8 & 9th- Turn for the Troops events nationwide.Local Store events: too many to list here this time...wow...Goooo Woodcraft! Check your local store for detailsAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Grain filling turnings, crosscut sled vs mitersaw and keeping on track with a large project. Hosted on Acast. See acast.com/privacy for more information.

If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. It’s show #591 - On today’s show, we’re talking about first aid kits, why no shapers?, when is enough, enough?, our favorite distractions when we have a creative block, and an alternative for table saw blade height adjustment. Woodcraft GiveawayWoodcraft is back with another giveaway for the month of October. This time they are giving away a 5 piece turning tool set and you can register to win by filling out the form on our website here. We will draw a winner and announce at the end of October. What's on the BenchMarc wasted time flattening a block plane sole.Shannon has started holiday turning.Matt has started designing a trestle table, specifically the base.Listener QuestionsDave asks about our first aid kits in our shops.Marc's first aid kitQuality TweezersTom has a shaper in his shop and loves it and can't figure out why no one has one or talks about them.Erica asks the questions every woodworker asks at some point: how flat is flat enough, how smooth is smooth enough, etc.Tom asks what we do when we hit a wall with a project and are ready to throw it out.Eduardo wonders if an answer to our table saw height adjustment issue from a previous episode could be solved by a scale placed on the fence. This suggestion fires up Marc and Matt and they decide to launch an entirely new form of table saw that will cost loads more and be less safe.Woodcraft Store EventsAll stores: October 17 and 18th JessEm Demos at every store nationwide.October 11th and 12th- Anniversary sales and open houses at the following stores: Baltimore, Virginia Beach, Pittsburgh, Birmingham, Lexington, Clearwater, and RichmondOctober 12th - Virginia Beach: Make a 3D Stairstep Cutting Board with Alex SnodgrassAsk Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Sponsored by Woodcraft! https://www.woodcraft.com/start And by the generous contributions of our patrons: https://www.patreon.com/woodtalk Today we’re talking about Don't miss your chance to win a Wood River Mini Turning Tool Set: https://woodtalkshow.com/giveaway/ What's on the Bench - Marc started the install of Nicole's builtin desk. - Shannon blew off the world and went bikepacking. - Matt is cleaning up to do more sawmilling. Kickback Last episode we had a question from Simon about loss of grip strength and how he should deal with it. We got some good suggestions: - Brian suggests "Hand-i-craft" also has nerve damage in their hand, leading to them coming up with some interesting approaches to woodworking: https://www.youtube.com/@hand-i-craft - Tommaso suggests: check out Essential Craftsman channel, he has a friend he works with who is an exceptional woodwork. The guy suffered a stroke and lost control of his dominant side, and theres a few videos on how he's dealing with it. - Marc suggests @delbasidtimbers on IG - https://www.instagram.com/delbasidtimbers/ - Butch is impressed by how hard we work when we are actually getting paid to do the show. Listener Questions - Tom is making small, 3" ish circles with a router and template and seeks advice on a safe and clean way to do it. Marc suggests a sanding jig instead of a router and referenced this video from Bob Lang: https://youtu.be/m6FfXUAPx1w?si=XuydD01MByNN83DH - John is building a workbench and asks about getting quartersawn material vs flatsawn material. - Brandon is looking for a resource to help him identify trees so he can buy logs and know what he is getting. Hosted on Acast. See acast.com/privacy for more information.

Sponsored by : If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. It’s show #590 - On today’s show, we’re talking about… Tools we wish existed, shopping for a grinder, Why don’t you buy another super expensive, super specific tool?? Giveaway Winner!Nathaniel Snell is the winner of the WoodRiver small shoulder plane. We had over 500 entrants and thank you for everyone who entered. The great new is Woodcraft likes the idea and there will be more of this to come. What's on the BenchMarc is make cat collar tags with a laser and avoiding drywall.Shannon used his new WoodRiver shoulder plane and admits it might has a use in his shop despite years of hating on shoulder planes.Matt finishing clearing out after sawmilling just in time for more sawmilling.KickbackJim visited Woodcraft while listening to the show and spent $1000 on stuff he doesn't need. Goooo Woodcraft! Dining Table DiscussionWe talk about the double edged sword of specialty tools: gimmick or useful? Listener QuestionsSimon had a tough medical procedure and is looking for advice on how to move forward with his woodworking with lack of grip strength.Tommaso asks what tool we want that doesn't currently exist on the market.John is shopping for a grinder as he is tired of resetting the bevel using stones and sandpaper.Gary asks Matt why he doesn't have a chipper for all the offcuts and waste from his saw mill.Ask Us a QuestionOur questions primarily come from our generous Patrons. You can also send in questions via the contact form. Or you can hit us up on Instagram at woodtalkshow. And you can even send us an email or voicemail at [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

  Sponsored by Woodcraft! On today’s show, we’re talking about using beeswax in finish, cleaning up an old saw, and can I run these through planer?? Hey Hey Hey! Shoulder Plane Giveaway!Marc has an extra WoodRiver small Shoulder Plane and he is going to give it away to one lucky person. Fill out the form here and take your chance to wind a shiny, steampunk looking shoulder plane. Hurry, because we will select the winner on the next show. What's on the BenchMarc is still working on the builtin desk for Nicole.Shannon did some dock repairs up in Maine and de-rusted his tools.Matt stacked and stickered wood.KickbackVon wants Matt to talk more about his saw milling decisions too.Michael likes Matt's radio style reading of Woodcraft store events.Cliff does all his project modeling on his iPad with his Apple Pencil and Shapr3D software.Listener QuestionsDavid got some beeswax and wonders about mixing his own finishes.Brandon has some old hand saws from his grandfather and great grandfather and he wants to clean them up to display them.Sandflex Blocks and Wizards Metal PolishBen has some old Oak flooring and a butcher block top that he has concerns about running through his planer.Woodcraft Store EventsAll September - Parkersburg, Cincinnati and Roanoke Woodcraft stores are having a Box Making Bonanza. Submit a box for a chance to win a Woodcraft gift card!Woodcraft of Hawaii is having Vendor Sale Weeks all month in September, including brands like Makita, DeWalt, Milwaukee, Stabila, and Bosch just to name a few.Sept. 5th - 7th, Omaha Woodcraft is having their Whale of a Sale - 15% off RIKON tools & accessories, 10% off select tools & accessories, 20% off wood, 15% off nearly everything else. Free demos & door prizes on Saturday, September 6.September 6 at Seattle Woodcraft, they’re having their 7th annual Tool Swap.September 6, Woodcraft of Indianapolis will host Family Day. Projects for kids, 15% off storewide, giveaways, food and special guests from Central Indiana Woodworkers, Fishers Makers Playground, Circle City Carvers, Festool & WoodMizer.September 13, 10-2 Woodcraft of Grand Rapids will host a Tool Swap & ShopOctober 4-5: Pacific Northwest Woodworking & Maker Expo Presented by Woodcraft held at Expo Idaho in Boise. Woodworking vendors, makers selling handmade goods, educational seminars and a tool sale. Tickets and details available now at https://www.woodmakerexpo.com/ Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about sealing templates, magnets in our projects, and to flatten or penetrate first? Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about… SERIOUS WOODWORKING DRAMA, our recommendation for a zero VOC finish, carpenters vs woodworkers, and grain vs figure. Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about… the role of AI in our work, sanding through the grits, and vertical grain drawer fronts. Hosted on Acast. See acast.com/privacy for more information.

Sponsored by Woodcraft! How to lower your chances of back injury in the shop, cutting the end of a workbench, designing with secondary woods, super-duper ultra mega laminated benchtop Hosted on Acast. See acast.com/privacy for more information.

It’s show # - On today’s show, we’re talking about… are you missing something by NOT engaging in CNC and digital design, cutting a burl, blame the sealer or blame the wood Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. What's on the BenchMarc is reclaiming a jungle gym and building raised garden beds.Shannon is building lyres out of cheap Michaels picture frames for a course for 5th graders.Matt is trying to figure out where to plant his own garden.Listener QuestionsGreg is a hybrid woodworker and wonders what he is missing by NOT embracing the world of CNC and more automated forms of woodworking.Brian asks for the best way to cut a burl from a tree.Martin has some green Cherry bowl blanks and despite sealing them they are checking a lot which has him rushing to turn them. Is it the wood or did he do something wrong with cutting and sealing?Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Answering emails from Patrons! Hosted on Acast. See acast.com/privacy for more information.

It’s show #582 - On today’s show, we’re talking about tear out on cherry, stock prep time savings: planer or jointer, and there’s bugs in my nut wood. Sponsored by WoodcraftWoodcraft is looking out for you guys. Do you know how? They want to make sure you know what to expect when it comes to this whole tariff debacle. Because tariffs are obviously going to impact a LOT of the major power tool purchases woodworkers make in the foreseeable future. So while details and dates are somewhat fluid, here are the most current timelines: JPW (that’s Jet and Powermatic): June 15thLaguna - July 1stSawstop - Mid-JulyWoodcraft is trying to be as transparent as possible and they’ll be sending out emails about this in the future. Bottom line is, prices are going up. Woodcraft didn’t set the prices so don’t shoot the messenger. So if you’re in the market and were thinking about making a major purchase, it probably behooves you to do it now. In fact, here’s one better. When you go to woodcraft.com, you’ll get a little popup offering you a discount for signing up for their newsletter. Do it, because you can save 10% off your first order. Exclusions apply so you’ll want to read that fine text but hey, a discount’s a discount. Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. What's on the BenchMarc has found his epoxy redemption and completed the mantel project.Shannon has started demo on his new deck.Matt is fixing stuff...then breaking it again.KickbackSteve Goldberg has Japan feedback for Steve Goodloe. He recommends the Takenaka Carpentry Museum in Kobe, the Ritsurin Garden in Takamatsu. Check out the Nakashima exhibit upstairs. Finally seek out the local craft shops and talk to the woodworkers. He found a shop called Inoue Hamono in Tokyo. The family/owners were friendly and helpful and I brought a dovetail chisel back to America. Listener QuestionsDrew was making a breadboard tenon and got some tearing along the baseline with his brand new straight router bit and asks why.Misha has short time in his shop like most of us and is looking to save time on stock prep but not wanting to buy both a jointer and a planer. Does he buy a planer or jointer? Can he get by with a planer alone? He does point out a pretty slick planer sled jig on Instagram.Steve has inherited some Butternut that was air dried and has some signs of bugs. What should he do with the material?Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #581 - On today’s show, we’re talking about…making stains suck less, cutting angled tenons, and what to do with all that ash? PLUS we have a new sponsor of the show! Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. What's on the BenchMarc is building with epoxy!Shannon is finishing with a ketchup packet.Matt is finishing up kitchen stuff and still sawing stuff too.KickbackJoe reaches back out to us to say his hand plane issues were because of the "friggin' frog" in the wrong place.Andy wants to tell us about a new modeling software at Layout.computer that was designed for chair makers but has now added a casework component too.Brandon offers the advice of putting an air filter outboard of the intake on his dehumidifier and what a difference it has made.Andrew calls in to share his surgeon father's advice about being cut with a dull tool or sharp tool, spoiler alert, "flappy bits" is a technical term.New Sponsor - WoodcraftWe reminisce about our early Woodcraft store experiences and the classes we have taken there. We are thrilled to be a part of that journey for other woodworkers and look forward to working with Woodcraft. Listener QuestionsDavid wants to know why stains suck so much and we try to tell him they don't...and fail. Marc suggests making a blotch control to help with stain absorption.Steve looks for advice on making angled tenons for a chair using power tools. Angled mortise or angled tenon?Paul has several Ash logs that were killed by the Ash Borer and asks for advice on what to do with them.Steve is taking a trip to Japan and wants to know some woodworking related stuff to see. We don't know but want to know so are asking the audience for advice. Write/call in and tell us your suggestions.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Hand tool frustration, feeling guilty about shop time, chunks of crotch, shop dehumidification, and glamor shots Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about first aid in the shop, free modeling software, wood in movies, which handsaw to buy, keeping those tootsies comfortable in the shop, finding the center of an edge, and sanding safely. Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. What's on the BenchMarc has woodworkers invade his shop.Shannon is building a coat rack disregarding wood movement.Matt moved into his kitchen and is now a professional chef.KickbackZack listened to all the shows and submits his comments through history all at once.Bram comments that made jinxed himself when he said he would never want to have to cut enough dovetails to fill and entire kitchen.Tom sums up our host's personalities perfectly.Listener QuestionsAntonio's feet hurt and he wants advice for his shop.Alex has a new ROS and is making a lot of dust. What is the best safety gear for sanding dust?Kevin wants to know when Shannon will make a Guild project.Josh asks how to best find the center of an edge.Jonathan cut his finger badly and it has him thinking about his first aid and emergency response in his shop.Eric can't use the free version of SketchUp any longer and asks about free 3D modeling software options.Von Welch was listening to the Flop House podcast and he wanted to know what movies we think of when it comes to wood and/or woodworking in movies.Antonio wants an opinion on dovetail saws and a saw for resawing.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about things to think about when woodworking in the desert, non-digital information sources, cutting large cookies without the big tools, and buying your first dust collector Sponsored by You: https://patreon.com/woodtalk What's on the Bench +Marc is making plywood workbenches and hating his life +Shannon is crafting a craft beer Christmas +Matt is using drawer slides and wishes he wasn't Kickback So many of you wrote in to say how much the burnout episode spoke to you. From those dealing with the loss of a parent to those struggling to find time for woodworking. Burnout is a very real issue and we are so thankful for all of you who commented and took the time to write to us about your own personal experiences with it. Listener Questions +Mike lives in the AZ desert and wonders how his dry climate changes how he woodworks and what he needs to consider when he builds projects that end up in much more humid climates. +Lucas inherited a shop that is already plumbed for dust collection and asks about buying his first dust collector. +Dane has a big hunk of burl that he resawed to make a chair seat. It took him a long time and left him exhausted and asks how he could improve other than buying a different tool. +Jeremy spends enough time in front of a computer and asks how we feel about woodworking magazines as a way to get more woodworking knowledge. Ask Us a Question: https://woodtalkshow.com/questions/ Finally you can find us individually at @mattcremona, @woodwhisperer, and @renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

We’re talking about… BURNOUT!!!, a tight riving knife, making big under-bevels, buying bulk lumber, and uneven table legs. Hosted on Acast. See acast.com/privacy for more information.

It’s show #576! On today’s show, we’re talking about a big WIA Recap, using a friend’s shop, resawing on the table saw, and when to use certain woods Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. What's on the BenchMarc is making a coffee bar and fiddling with a full size vacuum press set up.Shannon is trying to design his own interpretation of a Conoid chair...and failing.Matt is shortening his life huffing paint fumes.Woodworking in America RecapRyan, Kyler, and Paul wrote in with glowing reviews of Woodworking in America. For some it was the first ever woodworking conference while others had previous experience with the show. In all it was a positive vibe with a lot more focus on the presenters and less on the marketplace. The general feel is that we hope the show continues and can keep the smaller, education focused feel. Listener QuestionsKarter has a neighbor with great tools that he uses from time to time and asks how he can suggest that neighbor buy more tools so he can have his cast offs.Mark is resawing on his table saw with a small 8 1/4" blade and asks how he can get better results.David was recently given a bunch of wood and asks for resources to learn about which species are best for what application.Shannon Suggests:Lumber Update episode 68The Wood Databaseand this video of his lecture from WIA 2011 Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

On today’s show, we’re talking about…modifying a table, finish for a whiskey tumbler, salvaging parts from an old table saw, and woodworking with children. Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. KickbackThomas ran off the road when the title bell rang in his headphones and he thought it was a bicycle right behind him. Our message: don't wear headphones when riding your bicycle. Listener QuestionsLars wants to refinish a live edge desk and needs help matching the existing finish.Pennington wants to make a whisky tumbler from his friend's downed Red Oak tree.Peter has an unusable Rigid tablesaw and wonders if he can salvage and repurpose the parts.Jered has a 4 year old daughter and wants to work with her in the shop and needs advice.Michael wonders why shop is no longer in our schools and how to get a job in woodworking.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

We’re talking about building a table for a 3-season room, how can 6” sanders possibly be better and our go-to woodworking finishes. Hosted on Acast. See acast.com/privacy for more information.

Is traditional joinery antiquated, a safe glue for food items, starter tools for odd jobs, why so much 4/4 lumber in Illinois, and ideas for a special picture frame. Hosted on Acast. See acast.com/privacy for more information.

How NOT to take a Summer vacation, table saw flatness, coping with cross-eye dominance, wet legs, and plywood voids. Hosted on Acast. See acast.com/privacy for more information.

It’s show #571 On today’s show, we’re talking about kids getting started in woodworking, shop lighting, woodworking slumps, and hand planed vs sanded surfaces. Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. Listener QuestionsWeston is 13 and wants his parents to trust him around sharp tools.Jon wants to know if he should add splines to his large table top.Peter wants to know if hand planed surfaces are too smooth for some finishes.Christian asked about our shop lighting situations.Bob's been spending too much time on Instagram and asks if we ever get frustrated and disappointed with our woodworking.David's wondering if he should add support to his planer.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #570 On today’s show, we’re talking about tool knock-offs, resawing thin stock, glue and brads, which epoxy and saving the cherry trees. Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. What's On the BenchShannon finished up his mother's urn.Marc is suddenly finishing floors because Matt is a bad influence.Matt is building drawer boxes like a real woodworker.Listener QuestionsCharles is in an ethical quandary about manufacturers and intellectual property of machine designs.Eric has questions about epoxy open time and which brand to use.Alex is building guitars and looking for a way to resaw thin materialShannon says, check out the luthier friendDaniels is concerned about the Cherry trees on the DC mall being cut down.Isaac asks about using brad nails to clamp glued joinery and if they are strong enough.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #568 On today’s show, we’re talking about hard vs soft sanding pads, the purpose of a shavehook, PVA glue life, emotional projects, Cabinets with drawers, and practice pieces out of pine. Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. A HUGE THANK YOU TO ALL OF YOU WHO SPONSORED THE SHOW IN RESPONSE TO OUR LEAD SPONSOR LEAVING!!! Listener QuestionsDavid wonders about the hardness of sanding pad for doing cabinet work.Jeffrey asks about using dividers between drawers on a cabinet.Chris wants to know the purpose of a shavehook and how to sharpen it.Josh has old PVA and asks if it can be used past it's shelf life, and what even is that?Check out this link from Titebond Jeremy asks if we ever get emotional about finishing a project or completing a hard task.Joe asks if practicing in cheap Pine is actually detrimental.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #568 On today’s show, we’re talking about woodworker vs the HOA, sharpening a card scraper, flat bottom table saw cuts, and disposable blade hand planes Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. A HUGE THANK YOU TO ALL OF YOU WHO SPONSORED THE SHOW IN RESPONSE TO OUR LEAD SPONSOR LEAVING!!! What's on the Bench?Shannon is building an urn for his mom on a bum knee.Marc had some shop guests and built a table with a wiener.Matt is still making cabinets.News & KickbackAlex asks about this helical head router bit of death and how we feel about using it. Listener QuestionsFantin asks about building a new shop at his new house and how to handle the HOA.Bill is using his ATB blade to cut cabinet dados and wonders if he needs a square grind blade.Johnathan got an Accu-Burr tool to help with card scraper sharpening but asks whether he needs to go back to the stones the re-hone the edge every time before pulling the burr.Les asks about disposable blade hand planes like RALI and whether they are worth it for a new plane user.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #567 On today’s show, we’re talking about shoulder planes?, the very super cool tools fence, and a question about router fences that Matt probably can’t answer. Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. Thank you Patrons. WoodTalk is NOT brought to you by RocklerNo more Rockler sponsorship so yes, we have joined an ad network that is playing pre, post, and mid roll ads. Patreon supporters can subscribe to the ad free feed which can be found under the "My Membership" tab on the WoodTalk Patreon page. Or keep an eye on your inbox for the private RSS link. Listener QuestionsHoward asks about Marc's experience with the Super Cool Tools fenceMichael asks about micro adjust on a router table fence and for suggestions."Joe" asks whether a shoulder plane is useful enough to justify buying or should he stick with a paring chisel.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #566 On today’s show, we’re doing another Oops! All Questions episode. We’re talking about some new tools, the longevity of glue joints, uses for CNC, and domestic hardwood alternatives. Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. Thank you Patrons. NewsMarc is schilling books at the St Louis Woodcraft (Green Rockler) on Saturday, February 3rd.Listener QuestionsAlex asks our thoughts on the Bullseye Borer doohickeyChris is looking for options in domestic hardwoods beyond the usual suspects.Nathan has a question about modern glues and their longevity as compared to animal based glues of days past.Rocco runs a machine shop for a school and asks how he might integrate a wood CNC into the school and curriculum.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #565 On today’s show, we’re talking about power jointers vs jointer planes, finishing shop walls, which smoothing plane, and regretting Harvey Tools purchases? What's On the BenchMarc is working on Ava's vanity and discovering parts move if you leave them around long enough.Shannon has no room in his shop due to home remodeling projects...so he's rebuilding his tri bike.Matt is working on the kitchen cabinets.NewsWe were sad to learn of the passing of Erik FloripAIM acquires Popular Woodworking magazine.Listener QuestionsJustin asks about using a jointer plane vs getting a powered jointer for his mostly hybrid woodshop.Axel asks about finishing his shop walls.Luke wants a dedicated smoothing plane and asks whether a #3 or a #4 is the better choice.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #564 On today’s show, we’re talking about balancing a home shop and a work shop, Black Friday recap, and a whole bunch of kickback from YOU. Sponsored by YouIf you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show. Thank you Patrons. Sponsored by Rockler [caption id="attachment_48624" align="alignright" width="300"] Click to enter and win![/caption] Wood Talk is brought to you by Rockler! Rockler has been helping customers create with confidence for over 65 years. Rockler is giving away a $250 Gift Card to one lucky Wood Talk listener. Enter for your chance to win before December 31st at Rockler.com/woodtalk. KickbackAlex is a super fan with more than 26K minutes listening to WoodTalk this year.Douglas says he will build stuff off Etsy with no ethical dilemma.Alex figured out the hardware he needs for his gaming table.What's On the Dining TableWhat did we find on Black Friday sales? Mostly that we were underwhelmed with it all. Listener QuestionsAlex is thinking about maintaining 2 shops and 2 sets of tools.Alfred is looking for paint filler suggestions and wonders if he HAS to have a YouTube channel to be a successful woodworker.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

It’s show #561 On today’s show, we’re talking about gluing in the cold,dog hole placement, & Maintaining surfacing router bits What's On the BenchMarc is working on a vanity and stopping for dovetail practice.Shannon is making marquetry Christmas cards.Matt finished off his sunroom and office, now back to the kitchen.Matt ReactsToday we talk about how Matt looks like Jesus KickbackMark found a supplier for knockdownhardware for his gaming table in GermanyListener QuestionsWil lives up in Alberta and has an unheated shop and needs advice on doing glue ups and wood movement in the cold.Tom wants advice on wear and how many dog holes to add to his Joinery workbench. Alex asks about removing the pitch from his router surfacing bit and we suggest some handy products from Rockler for pitch removal.Ask Us a QuestionSend in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to [email protected] Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

trusting other people’s measurements, domino vs dowel joinery, split top or not, and dealing with the poor decisions of previous homeowners. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Electricity for woodworkers, cheap hand planes, refinishing a Walnut table, what to do with old saw blades, woodworking in someone else’s shop, and snapping bandsaw blades. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Norm Abram the YouTuber, why’s Matt so small and shy yet confident, features of an all in one workbench, and organizing portable power tools. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

We're talking about what does “credibility” look like in 2023? Pore-filling, getting shop time when you have kids, and finishing only one side of a board. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Making barn videos, sharpening curved blades, learning how to train someone in a one-man shop, and we heard from you guys about a bunch of things that are Matt’s fault! Hosted on Acast. See acast.com/privacy for more information.

Woodworking and mental health, a Moxon vise as your only vise, why a quick release mechanism doesn’t exist for table saw blades, and tools that have been in storage. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Demonstrating woodworking, shoulder planes, dealing with splinters, applying Rubio to a frame & panel, breadboard popularity, and premium router table set ups. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

What we look for in an ideal shop space, diamond saw files, dealing with a wife that oversteps her bounds, and owning multiple sets of tools. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Workbench height, end grain routing, hand planing body language and so much more. And to celebrate 500 episodes of this dumb show, we’re doing to do a celebratory woodworking quiz. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Paralysis by analysis, the best way to learn woodworking, new vs vintage hand tools, and tool maintenance schedules. Also now featuring your funny captions Hosted on Acast. See acast.com/privacy for more information.

Table saw extension wings, what you get when you pay more for a random orbit sander, wet wood, identifying wood, and material for a new bench top. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

It’s all email today as we clean out our inbox. We’re talking about resawing by hand, wood filler, strength of rabbet joints, soaking wood, table outfield table size, & cutting a crosshatch pattern Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

How woodworking has changed in the last decade, building a door, the future of furniture design, the Handworks show, table top glueups, and installing the Turbo Vise. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Variable suction on a dust collector, having helpers in the shop, how to use turning tools, dealing with a twisted board, and wood allergies, Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Our woodworking predictions, our woodworking goals for 2019, stickering barrel staves, rite of passage projects, clamping pressure, sanding dovetails, dueling dust collectors, what we watch/listen to, getting back into woodworking after a layoff Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Outdoor finish options, what's the deal with the DelVe Square?, Plywood safety, applying Enduro-Var, making gifts for other woodworkers, expired finishes, soundproofing the shop. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Getting that vintage Cherry look, building movie furniture, how to prepare the shop for the summer, low angle planes, outsourcing finishing, air dried vs kiln dried lumber for a bench, and our critique of bad critiques. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Edge-banding router bits, boxed beam construction, our contributions to woodworking, to pre-finish or not to pre-finish, drill press speeds, epoxy pouring tips, and should you buy a Domino. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Struggling to get started on a project, shellac and wax finish, sharpening issues and the MK.II jig, book recommendations, and hollowing with hand tools Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Grain tear out, bandsaw upgrades, why do they like gray and how can we stop it?, Woodworking stuff in Europe, and what lathe setup to start with. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

On today's show we're talking about glue for bent laminations, storing hardware and fasteners, dust collection basics, and mid priced handsaws. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Using plans, smoothing plane angles, what's the deal with horse butt?, budgeting for the future, and what will come of the Sawstop acquisition? Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

a bench for a hybrid woodworker, speeding up the cherry's color change, building for tools, and the morality and ethics of taking inspiration. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Intentionally building out of square, the necessity of miter saws, adding texture, choosing a router plane, and introducing new woodworkers to tools. Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.

Hosted on Acast. See acast.com/privacy for more information.